Tests most Lasers from 1mW to 2000mW output power. Displays resolution in 1mW increments to 2000mW.
Our first hobbyists entry level Analog Laser Power Meter aptly named LaserBee™ A for (A)nalog. It uses a Thermopile Sensor head and comes pre-calibrated against a NIST traceable Coherent FieldmaxII Lab LPM.
Just shine your unfocussed Laser beam onto the large 15mm X 15mm Sensor and read the power directly on the large easy to see LED Display.
Featuring a true Zeroing control dial to zero out the readings from random external heat sources if they are in the vicinity of the test to assure accurate readings.
Power comes from a standard 9 Volt battery available anywhere. Power consumption is so low that a fresh alkaline battery can power the LaserBee™ A for up to 18 hours.
Specifications Power Supply: ................................. 9Volt Battery Sensor: ............................................. Thermopile (by J.BAUER Electronics) Sensor Area: .................................. 15mm x 15mm (225 square mm) Sensor Cable Length: ................... 18.0" Thermopile Head Dimensions: .. 1.65" x 1.50" x 1.00" Power Range: .................................. 1mW to 2000mW
Spectral Range: .............................. 300nm to 1500nm Response Time (100%): ............... 30-40 Seconds Response Time (90%): .................. 14-16 Seconds Display Resolultion: ....................... 1mW to 2000mW Power consumption: ..................... 30 milliamps @ 9vdc Total Dimensions: ......................... 4.00" x 2.50" x 1.50"