J.BAUER Electronics LaserBee™
Copyright © 2008-2024 J.BAUER Electronics All Rights Reserved.
International Buyers Only
Tests most Lasers from 3mW to 3200mW output power. Display resolution in 0.1mW increments to 999.9mW then in 1mW increments to 3200mW.
Note:-
The New 3.2W LaserBee™ II Deluxe now has RED buttons and an ON/OFF Rocker Switch.
The New 3.2 WattLaserBee™ II products come pre-assembled and pre-calibrated so you can use them as soon as they arrive whether you choose the Standard (OEM) PCB model or the fully enclosed Deluxe LaserBee™ II.
This 3.2 Watt (3200mW) Laser Power Meter was designed to let the hobbyist technician know the output power of almost any Laser from 3mW up to 3200mW. It does NOT require an optical correction factor chart. It does NOT use a photodiode sensor. The 3.2 WattLaserBee™ II Deluxe uses an included Thermopile Sensor Head that now has a connector and included removable quick connect Thermopile cable. The 3.2 Watt Laserbee™ II is calibrated against a NIST traceable Coherent FieldmaxII Lab LPM.
The LCD Backlight is controlled by the Push Buttons to turn it "ON" or "OFF" if you need to conserve battery power. The 3.2 Watt LaserBee™ II can test most Lasers from 3mW to 3200mW output power in 0.1mW increments to 1000mW then continues in 1mW increments to 3200mW.
Easy to operate... simply attach a single 9 volt battery... or external 9VDC power supply and shine your Laser's Beam onto the Thermopile Sensor and read almost any Wavelength Laser's power output directly on the Backlit LCD Display.
Comes with clear and easy to understand User Instructions and Drawings as well as our bundled Full Featured EagleEye™ Windows Data Logging Software.
The new LaserBee™ II products now Feature lower and higher power detection range and resolution.. not to mention our exclusive full featured EagleEye™ Data Logging Software and Peak Detection.
With the EagleEye™ Data Logging Feature you can see real time Laser Power, Peak Power and Average Power right on the PC screen. You can Data Log the LaserBee™ II's output using the included EagleEye™ Data Logging Software. You can then Graph your data on screen and/or print it out to a Printer for a hard copy that you can include with your Tested Lasers.
The 3.2W LaserBee™ II Deluxe model has the same specifications as the Standard LaserBee™ II (OEM) model except that the LaserBee™ II Deluxe is professionally assembled, tested, calibrated and housed in a high quality textured and sloped plastic enclosure. The LaserBee™ II Deluxe comes standard with our EagleEye™ Data Logging feature and Peak detection.
For USB Ports an RS232 Conveter Cable is supplied with the LaserBee™ II products, If you do not have a Serial Port available on your PC, the supplied USB to RS232 Converter and Cable can be used to communicate with your LaserBee™ II products.
Specifications
Power Supply: ................................. 7-12 Volts DC (9Volt Battery or 9Volt DC Adapter recommended)
Sensor: ............................................. Thermopile (by J.BAUER Electronics) only one sensor is supplied
Sensor Area: .................................. 8mm x 8mm (64 square mm)
Sensor Cable Length: ................... 18.0"
Thermopile Head Dimensions: .. 1.65" x 1.50" x 1.00"
Power Range: .................................. 3mW to 3200mW
Spectral Range: .............................. 300nm to 1500nm
Response Time (100%): ............... 10-12 Seconds
Response Time (90%): .................. 3-4 Seconds
Display Resolultion: ....................... 0.1mW to 1000mW... 1mW increments to 3200mW
Power consumption: ..................... 4 milliamps @ 9vdc (without LCD Backlight)
Power consumption: ..................... 17 milliamps @ 9vdc (with Green LCD Backlight)
Power consumption: ..................... 19 milliamps @ 9vdc (with Blue LCD Backlight)
Encl. Total Dimensions: ................ 5.60" x 3.50" x 1.50"
EagleEye™ Software: .................... on CD
User Instructions: .......................... on CD